LTC4050EMS-4.1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4050 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.1V |
| Power Supplies | 6V |
| Number of Channels | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.1V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 10V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 10V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 585mA |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4050EMS-4.1#PBF Overview
The package Tube contains it, and you can find it there.In the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), there is a version of it.There is a mounting type Surface Mount specified for the device.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Device charging requires Constant - Programmable current.Parts related to the base part number LTC4050 can be found based on that number.Among its terminations, there are 10.10 pins are on it in total.Features like Timer can be programmed.This product requires that a total of 10 pins be connected in order for it to work correctly.The number of available channels is 2.This should be able to operate off of a battery that has a voltage of 6V.A 10V supply voltage can be applied to it.There is a possibility of high efficiency if the output voltage is set to 4.1V.A 500mA output current is used for operation.There is a subcategory of Power Management Circuits for this device.This circuit can function at a low supply voltage, such as 4.5VV.Vsup (maximum supply voltage) is set in the command to 3mA.It is set to 6V when it comes to the power supply for the part.There is a 4.5V volt minimum input voltage requirement.10V is the maximum input voltage it can handle.Voltage 4.1V is the maximum output voltage needed for this operation.
LTC4050EMS-4.1#PBF Features
2 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
LTC4050EMS-4.1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4050EMS-4.1#PBF Battery Chargers ICs applications.
- Cellphones
- Home appliances
- Portable speaker systems
- Conventional charge
- Fleet management
- Truck dealers
- Robot
- Tablets
- GPS portable devices
- Personnel carriers
