LTC4053EDD-4.2#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4053 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.25V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 4.25V |
| Max Input Voltage | 6.5V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 1.25A |
| Height Seated (Max) | 0.85mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
LTC4053EDD-4.2#PBF Overview
It comes in the package?of a Tube. It is contained in a package named 10-WFDFN Exposed Pad.This device has a mounting type of Surface Mount.It is best to set the temperature to -40°C~85°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.It is necessary to supply the device with Constant - Programmable current in order to charge it.You can find this device's related parts by searching the base part number LTC4053.I have found that the number of terminations found in it as a whole is 10.A total of 10 pins are present on it.Among the programmable features are Timer.During the installation process, this product requires the connection of 10 pins.It is possible to access 1 channels.This should be able to operate off of a battery that has a voltage of 5V.With a 6.5V supply voltage, it is capable of withstanding the operation of the device.Using a 4.2V output voltage results in high efficiency.There is a constant output current of 500mA when it is operating.Subcategory 0 is home to this device.It is capable of functioning at a voltage as low as possible, for example 4.25V voltage for this circuit is used.It is configured to be 2mA for Vsup (maximum supply voltage).The part's power supply is set to 5V.It has a 4.25V volt minimum input voltage.It can accept a maximum input voltage of 6.5V volts.Voltage 4.2V is the maximum output voltage needed for this operation.
LTC4053EDD-4.2#PBF Features
1 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package
LTC4053EDD-4.2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4053EDD-4.2#PBF Battery Chargers ICs applications.
- Drone
- Pallet jacks
- Floor scrubber
- Man lift
- Ruggedized notebooks/tablet computers
- Truck dealers
- Opportunity charge
- USB power delivery (USB-C) devices
- Electricity bank
- Remote control toys
