LTC4059EDC#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC4059 |
| Pin Count | 6 |
| Output Voltage | 4.2V |
| Max Output Current | 900mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.242V |
| Min Input Voltage | 3.75V |
| Max Input Voltage | 8V |
| Nominal Input Voltage | 8V |
| Min Output Voltage | 4.158V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 900mA |
| Height | 700μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4059EDC#TRMPBF Overview
The Tape & Reel (TR) package contains it.The 6-WFDFN Exposed Pad package includes it as a convenience.Mounting type is Surface Mount.It is best to set the temperature to -40°C~85°C TA.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you need Constant - Programmable current.The base part number LTC4059 represents its related parts.There are no terminations in it at all.There are 6 pins on the circuit board.As far as the charging current is concerned, it is 900mA at full charge.In order for the product to function as intended, there are 6 pins that must be connected.It is possible to use a total of 1 channels.Using a 5V battery should be enough to run it.Withstanding a voltage of 8V, it is a reliable piece of equipment.Having the output voltage set to 4.2V may result in high efficiency.The output current is set to 500mA in this case.Devices in this category are classified as Power Management Circuits.This device can work at as low a voltage as possible, such as 3.75V.The part's power supply is set to a value of 5V.It has a 3.75V volt minimum input voltage.There is a maximum input voltage of 8V volts that it can take.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.242V.The maximum output current is reduced to 900mA in order to meet the operation conditions.
LTC4059EDC#TRMPBF Features
1 channels
Power Management Circuits subcategory
6-WFDFN Exposed Pad package
LTC4059EDC#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4059EDC#TRMPBF Battery Chargers ICs applications.
- Wireless power
- Crosswalk marker lights
- High end, feature-rich consumer
- Maintenance shops
- Rental fleets
- Robot
- Electric vehicles
- Boat
- Portable speaker systems
- Model aircraft
