LTC4060EFE#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Output Current | 2.1A |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Current - Output | 2A |
| Voltage - Output | 11.3V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 10V |
| Nominal Input Voltage | 10V |
| Number of Cells | 4 |
| Charge Current - Max | 2A |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC4060EFE#PBF Overview
It belongs to package TSSOP. 16 pins are attached to it. It is recommended that this part's minimum supply voltage not be less than 4.5V volts. There should be 10V voltage over 10V volts on the supply to this chip. It must be greater than -40°C to activate this device. The product should be used below 85°C degrees Celsius. There is 11.3V voltage output from it. Under 10V, it is possible to power the chip input voltage. A voltage below 4.5V is suitable for running the device. Batteries should not be powered above 2A for battery safety.
LTC4060EFE#PBF Features
Available in TSSOP Package
with 16 Pins
LTC4060EFE#PBF Applications
There are a lot of Analog Devices, Inc. LTC4060EFE#PBF Battery Management ICs applications.
- Multicopter and drones
- Head up display (HUD)
- Tower communications
- Rear light with dynamic control
- Cell phone towers
- Continually optimizing battery performance
- xEV charging station (off-board charger)
- Body control module
- Motor drive - DC12V-48V industry
- Hybrid electric vehicles
