LTC4064EMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC4064 |
| Pin Count | 10 |
| Output Voltage | 4V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.25V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 4V |
| Min Input Voltage | 4.25V |
| Max Input Voltage | 6.5V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1A |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4064EMSE#PBF Overview
There is an Tube package that contains it. It is contained in a package named 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad.In this case, the device has a mounting type of Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.Charge the device by providing it with Constant - Programmable current.This part number LTC4064 can be used to find its related parts.It has a total of 10 terminations.The device is equipped with a total of 10 pins.In addition to the standard features, a number of programmable functions are available to the user, such as Timer.As far as the charging current is concerned, it is 1A at full charge.It operates on the basis of 10 pins.A total of 1 channels are available for use.Battery voltage should be 5V.It is crucial that the supply voltage of the device does not exceed 6.5V for the device to work properly.With a 4V output voltage, high efficiency is possible.During operation, 500mA represents the output current.This device is classified as Power Management Circuits under the subcategory.It is capable of functioning at a voltage as low as possible, for example 4.25V voltage for this circuit is used.2mA is set for Vsup (maximum supply voltage).A power supply setting of 0 has been assigned to the part.A minimum input voltage of 4.25V volts is required for this device.6.5V is the maximum input voltage it can handle.The maximum output supply voltage is reduced to 4V to fulfill the operation requirements.
LTC4064EMSE#PBF Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
LTC4064EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4064EMSE#PBF Battery Chargers ICs applications.
- Solar charging
- Floor scrubber
- Trash compactors
- Digital camera
- Material handling
- Modern LA
- Electric tour bus
- Smart power strips
- Drone
- Wireless headphones
