LTC4078EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4078 |
| Function | Power Management |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 950mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 22V |
| Supply Current-Max (Isup) | 0.8mA |
| Nominal Input Voltage | 5.5V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Max Charge Current | 950mA |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4078EDD#PBF Overview
For package 12-WFDFN Exposed Pad, it is appropriate. This power management IC utilizes an analog IC POWER SUPPLY SUPPORT CIRCUIT. As of right 1w, there are 1 channels available. In total, it has 10 pins. Tube cases are used for packaging. Supply voltage should not fall below 4.3V volts for this electric component. In this case, this electrical part is mounted in the way of Surface Mount. It is recommended that the power IC's supply voltage not exceed 5.5V volts. The Power Management functions can be delivered by it. To best deliver its performance, the electronic part should be operated at a temperature of -40°C~85°C TA. A battery chemistry of Lithium Ion/Polymer is used in this electronic part. There is a 5V volt power source. It is imperative to keep this transceiver ic set to 5V at all times. The model is based on the LTC4078 family. Ensure that the maximum supply current (Isup) is below 0.8mA. It is available to power the battery instrument input voltage under 22V. Input voltages below 4.3V volts are acceptable for the battery protector ic. It is possible to supply the battery management IC with a maximum current of 950mA.
LTC4078EDD#PBF Features
Available in 12-WFDFN Exposed Pad Package
with 10 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
operate supply voltage at the range of 5V
Output Voltage at the range of 4.2V
LTC4078EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4078EDD#PBF Battery Management ICs applications.
- Head up display (HUD)
- Robots
- Electric-powered machinery
- Utility vehicles
- Body ECU
- Accessory drives
- Electric train traction batteries
- Ventilator
- Cell phone towers
- Trucks
