LTC4080EDD#PBF

Constant - Programmable LTC4080 10-WFDFN Exposed Pad Tube 10 Terminals 10 Pin

Manufacturer: Linear Technology/Analog Devices
Nocochips NO: 471-LTC4080EDD#PBF
Package: 10-WFDFN Exposed Pad
Datasheet: PDF
Stock: 752
Description: Constant - Programmable LTC4080 10-WFDFN Exposed Pad Tube 10 Terminals 10 Pin (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	10-WFDFN Exposed Pad
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	LTC4080
Pin Count	10
Qualification Status	Not Qualified
Output Voltage	4.2V
Operating Supply Voltage	5V
Input Voltage-Nom	5V
Max Supply Voltage	5.5V
Min Supply Voltage	3.75V
Analog IC - Other Type	BATTERY CHARGE CONTROLLER
Min Input Voltage	3.75V
Control Mode	CURRENT-MODE
Output Current-Max	0.8A
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Switcher Configuration	BUCK
Switching Frequency-Max	2750kHz
Battery Chemistry	Lithium-Ion
Number of Cells	1
Current - Charging	Constant - Programmable
Charge Current - Max	525mA
Height Seated (Max)	0.8mm
Length	3mm
RoHS Status	ROHS3 Compliant

LTC4080EDD#PBF Overview

There is an Tube package that contains it. It is contained in a package named 10-WFDFN Exposed Pad.A mounting type of Surface Mount has been specified for this device.The best way to adjust the temperature is to set it to -40°C~85°C TA.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.To charge the device, there is a requirement for Constant - Programmable current.Based on the base part number LTC4080, it is possible to find related parts for this device.10 terminations are present.10 pins are attached to it.It is listed on the device that it can charge at a maximum current of 525mA.There are 10 pins required in order for the product to function.To ensure the device works properly, the supply voltage should not exceed 5.5V.There is a possibility of high efficiency if the output voltage is set to 4.2V.The device can operate at a voltage of 3.75V as low as possible.It has a 3.75V volt minimum input voltage.There is 5V voltage input on the device.As a rule of thumb, the supply voltage needs to be set to 5V for optimum efficiency.It can accept a maximum input voltage of 5.5V volts.It is most common to find parts with 2750kHz switching frequencies.