LTC4085EDE-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4085 |
| Pin Count | 14 |
| Output Voltage | 4.1V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 1.5A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.35V |
| Max Input Voltage | 5.5V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.1V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4085EDE-1#PBF Overview
I found it in the Tube package, which comes with everything you need.The package that is included with it comes in the shape of a 14-WFDFN Exposed Pad.A mounting type of Surface Mount has been specified for this device.Ensure reliable performance by setting the temperature to -40°C~85°C TA.There is an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT used in this device.Charge the device by providing it with Constant - Programmable current.The related parts of the base part number LTC4085 can be found by following the order of the base part number.As far as the terminations are concerned, there are 14.In the case of the battery pack, it is 4.1V.There are 14 pins on it, so it has a very simple design.There are 14 pins necessary to make it work.In total, this application supports 1 channels.It should be possible to run it from a 5V battery it should be able to run at all times.An input voltage that is equal to 5.5V can be applied to it without any problem.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.1V.In this case, the output current of the device is set to 1.5A.The device you are looking at belongs to the subcategory of Power Management Circuits.The device can operate at a voltage of 4.35V as low as possible.A power supply setting of 0 has been assigned to the part.PowerPath? is the series number of this electrical component.Input voltage minimum is 4.35V volts, which is a requirement of the device.A maximum input voltage of 5.5V volts can be applied to it.
LTC4085EDE-1#PBF Features
Battery pack voltage of 4.1V
1 channels
Power Management Circuits subcategory
14-WFDFN Exposed Pad package
LTC4085EDE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4085EDE-1#PBF Battery Chargers ICs applications.
- TV sticks
- Forklift
- GPS portable devices
- Electricity bank
- Golf carts
- Crosswalk marker lights
- Marine buoy lights
- Fast charge
- Floor scrubber
- Electrical Utility industry
