LTC4096EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4096 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.25V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 800mA |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.25V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.8mA |
| Nominal Input Voltage | 5.5V |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.2A |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4096EDD#PBF Overview
In the Tube package, you will find it.A 10-WFDFN Exposed Pad package is included with this item as part of its contents.This device has a mounting type of Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.To charge the device, you need Constant - Programmable current.The related parts of the base part number LTC4096 can be found by following the order of the base part number.The number of terminations found in it is 10 as a whole.With 10 pins on it, it has a very simple design.Features such as Current are programmable.At the maximum charging current, it has a rating of 1.2A.For the product to work correctly, 10 pins are required, and a connection to each pin is required.Currently, there are 1 channels available.If it runs off of a 5V battery, then it should be able to run continuously.With a 5.5V supply voltage, it is capable of withstanding the operation of the device.In the case of 4.2V, the output voltage is likely to produce high efficiency.A device of this type will have its output current set to 800mA in this case.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.This device can work at as low a voltage as possible, such as 4.25V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 0.8mA.The part's power supply is set to a value of 5V.There is a minimum input voltage of 4.25V volts.It can take a maximum input voltage of 5.5V volts.
LTC4096EDD#PBF Features
1 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package
LTC4096EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4096EDD#PBF Battery Chargers ICs applications.
- Remote control toys
- Rental fleets
- Drone
- Electricity bank
- Wearables
- Mobile router
- Electronic dictionary
- USB power delivery (USB-C) devices
- Maintenance shops
- Robot
