LTC4101EG#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | G |
| Surface Mount | YES |
| Number of Pins | 24 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 6V TO 28V SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Voltage - Output | 5.504V |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 28V |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 345kHz |
| Number of Cells | 1 |
| Charge Current - Max | 4A |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LTC4101EG#PBF Overview
For the G package, it is appropriate. Total pins are 24. A voltage of at least 3V volts is required on this electric component. It is recommended that the power management IC's supply voltage is 5.5V higher than 5.5V volts. To activate this power management IC, it should not be less than -40°C. A temperature below 85°C is suggested for use. In total, 24 pins can be found on it. This battery instrument can be found to have ALSO REQUIRES 6V TO 28V SUPPLY. The output voltage is 5.504V. Input voltages under 28V are available to power the electronic battery. The power IC is suitable to run the input voltage below 6V. It is recommended not to power the battery below 4A for battery safety.
LTC4101EG#PBF Features
Available in G Package
with 24 Pins
LTC4101EG#PBF Applications
There are a lot of Analog Devices, Inc. LTC4101EG#PBF Battery Management ICs applications.
- Grid power infrastructure
- On-board battery charger
- Infotainment/cluster
- Non-road type vehicles
- Reporting operational status to external devices
- xEV charging station (off-board charger)
- Leisure
- Continually optimizing battery performance
- Peak shaving
- ADAS radar
