LTC4210-1CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Auto Retry |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.7V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Depth | 1.75mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4210 |
| Pin Count | 6 |
| Output Voltage | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 650μA |
| Max Input Voltage | 17V |
| Supply Current-Max (Isup) | 3.5mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | ON, TIMER |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4210-1CS6#TRMPBF Overview
As part of the SOT-23-6 Thin, TSOT-23-6 package, it is included.In the current state, 1 channels are accessible.There is a Cut Tape (CT)-shaped package for it.Hot-swappable device terminates wHot-swappable deviceh 6 in total.Device DUAL is in the terminal position.The device consists of a total of 6 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.There is a Surface Mount-like arrangement.This electrical component is classified as Hot Swap Controller.If you want reliable performance, you should set the temperature to 0°C~70°C.Apps for General Purpose are available on the device.A feature of Auto Retry describes it.As long as you have a 2.7V~16.5VV power source, it should work.LTC4210 numbers belong to this family.Hot-swappable device is necessary to use 6 pins in order to operate the device.As far as Power Management Circuits is concerned, this gadget is self-contained.The programmable features of this device are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.There is currently an adequate supply of 650μA.To ensure normal operation, the supply voltage (Vsup) must be kept above 2.7V.The maximum operating current is 3.5mA.A 3V output voltage allows for high efficiency.
LTC4210-1CS6#TRMPBF Features
The terminal position of 6
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 3V
LTC4210-1CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4210-1CS6#TRMPBF hot swap controllers applications.
- Thermal limitation
- Storage network
- Temperature monitor output
- Supply voltage monitoring
- Base station
- Server backplane system
- Overvoltage protection
- Comprehensive analog and digital capabilities
- Backplane
- Industrial computers and servers
