LTC4210-2CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Latched Fault |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.7V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Depth | 1.75mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4210 |
| Pin Count | 6 |
| Output Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 650μA |
| Supply Current-Max (Isup) | 3.5mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | ON, TIMER |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4210-2CS6#TRMPBF Overview
It's included in the SOT-23-6 Thin, TSOT-23-6 package.As of now, 1 channels are available.In the form of a Cut Tape (CT), it is packaged.6 terminations are present in total.In this case, the device is located at terminal DUAL.6 pins make up the entire device.High efficiency can be achieved by using 5V as supply voltage.As Surface Mount would say, it's set up like that.Hot Swap Controller?is?the?classification?for?this?electrical?component.To ensure reliable operation, set the temperature to 0°C~70°C.Devices with General Purpose applications are available.The article appears in Latched Fault.Using a 2.7V~16.5VV power source should be able to power the device.In the LTC4210 family, it appears as a number.For operation, 6 pins are used.Despite its self-contained nature, Power Management Circuits is a very compact device.Current Limit, Fault Timeout, OVP, Slew Rate, UVLO is its programmable feature.Presently, there is a limited supply of 650μA.For normal operation, the supply voltage (Vsup) should be kept above 2.7V in order to maintain a constant level of power.A maximum supply current of 3.5mA is required for the device to operate.When the output voltage is 5V, high efficiency is possible.
LTC4210-2CS6#TRMPBF Features
The terminal position of 6
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 5V
LTC4210-2CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4210-2CS6#TRMPBF hot swap controllers applications.
- Circuit breakers for electronic circuits
- Industrial
- Current monitoring
- Comprehensive analog and digital capabilities
- Industrial application
- CompactPCI
- Overcurrent protection
- Power supply hotswap & inrush control
- Limitting the inrush current
- Firewire
