banner_page

LTC4211CMS#PBF

Tube Active 1 Surface Mount Hot Swap Controllers 1mA mA UVLO 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4211CMS#PBF
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 142
  • Description: Tube Active 1 Surface Mount Hot Swap Controllers 1mA mA UVLO 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 4 months ago)
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 10
Operating Temperature 0°C~70°C
Packaging Tube
Published 2006
JESD-609 Code e3
Feature UVLO
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Matte Tin (Sn)
Applications General Purpose
Subcategory Power Management Circuits
Technology CMOS
Voltage - Supply 2.5V~16.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Depth 3mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC4211
Pin Count 10
Output Voltage 140mV
Power Supplies 5V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Output Current 50mA
Adjustable Threshold YES
Current - Supply 1mA
Nominal Input Voltage 17V
Internal Switch(s) No
Programmable Features Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP
Feature Pins /FAULT, FB, FILTER, ON, /RESET, TIMER
Height 860μm
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LTC4211CMS#PBF Overview


The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package includes it.1 channels are currently available.A Tube-shaped package holds it.In total, it has 10 terminations.In this case, the device is located at terminal DUAL.A total of 10 pins are present on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.The way it's set up is the way Surface Mount wants it.An electrical component classified as Hot Swap Controller belongs to this category.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.A General Purpose application is available for the device.The article is featured in UVLO.Hot-swappable device should work if you use a 2.5V~16.5VV power source.Hot-swappable device is included in the LTC4211 family of numbers.A 10 pin is used for operation.A gadget like this is self-contained in Power Management Circuits.Programmable features include Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP.Presently, there is a sufficient supply of 1mA.For normal operation, Vsup should be kept above 2.5V.The power supply of the part is referred to as 5V.With a 140mV output voltage, high efficiency is possible.

LTC4211CMS#PBF Features


The terminal position of 10
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP
Output voltage of 140mV

LTC4211CMS#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC4211CMS#PBF hot swap controllers applications.

  • Switch
  • Supply voltage monitoring
  • Thermal limitation
  • Base station
  • PC board hot swap insertion and removal
  • DC boost circuit
  • Overvoltage protection
  • Electric vehicle
  • Servers
  • Circuit breakers for high-side circuits

Write a review

Note: HTML is not translated!
    Bad           Good