LTC4217CDHC-12#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Thermal Limit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~26.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4217 |
| Pin Count | 16 |
| Output Voltage | 12V |
| Max Output Current | 2A |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Max Output Voltage | 12V |
| Max Input Voltage | 26.5V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 28V |
| Internal Switch(s) | Yes |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO |
| Feature Pins | FB, /FLT, IMON, ISET, OV, PG, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4217CDHC-12#PBF Overview
There is a 16-WFDFN Exposed Pad package that includes this.At the moment, 1 channels are accessible.Hot-swappable device comes in the shape of a Tube.There are a total of 16 terminations on it.Device DUAL is in the terminal position.The device consists of a total of 16 pins.High efficiency can be achieved with a voltage supply of 12V.As Surface Mount would say, it's set up like that.Hot Swap Controller, Monitor?is?the?classification?for?this?electrical?component.Ensure reliable operation by setting the temperature to 0°C~70°C.Devices with General Purpose applications are available.Hot-swappable device is featured in Thermal Limit.Hot-swappable device should be able to work wHot-swappable deviceh a 2.9V~26.5VV power source.Hot-swappable device is included in the LTC4217 family of numbers.During operation, 16 pins are used.Power Management Circuits contains this gadget on its own.The programmable features of this device are Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO.Presently, there is a limited supply of 1.6mA.To ensure normal operation, the supply voltage (Vsup) must be kept above 2.9V.There is a maximum supply current of 3mA for its operation.When operating criteria are met, the maximum output current is reduced to 2A.A 12V output voltage allows for high efficiency.
LTC4217CDHC-12#PBF Features
The terminal position of 16
Features of Thermal Limit
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
Output voltage of 12V
LTC4217CDHC-12#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4217CDHC-12#PBF hot swap controllers applications.
- Continuous monitoring of device temperature
- USB interface
- Servers
- Network switches
- Redundant Array of Disks (RAID)
- Loads
- Base station power distribution system
- Overcurrent protection
- Board or blade insertion into live backplanes
- Power supply hotswap & inrush control
