LTC4217IDHC-12#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Thermal Limit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~26.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4217 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 26.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Current - Output (Max) | 2A |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 3mA |
| Internal Switch(s) | Yes |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO |
| Feature Pins | FB, /FLT, IMON, ISET, OV, PG, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4217IDHC-12#TRPBF Overview
It's included in the 16-WFDFN Exposed Pad package.Hot-swappable device is currently possible to access 1 channels.There is a Tape & Reel (TR)-shaped package for it.There are 16 terminations in total.Device DUAL is located at the terminal position.16 pins make up its total.High efficiency can be achieved when the supply voltage is 12V.This is set up in the same way as Surface Mount.Hot Swap Controller, Monitor?is?the?classification?for?this?electrical?component.To ensure reliable operation, set the temperature to -40°C~85°C.There are General Purpose applications available for the device.There is a mention of it in Thermal Limit.In theory, it should work as long as the power source has a 2.9V~26.5VV input.Hot-swappable device belongs to the LTC4217 family of numbers.As far as Power Management Circuits is concerned, this gadget is self-contained.Among its programmable features are Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO.Currently, 1.6mA is in short supply.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 2.9V.26.5V (maximum supply voltage) is set.The maximum supply current it requires to operate is 3mA.2AV is the device's maximum output.
LTC4217IDHC-12#TRPBF Features
The terminal position of 16
Features of Thermal Limit
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
LTC4217IDHC-12#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4217IDHC-12#TRPBF hot swap controllers applications.
- PC board hot swap insertion and removal
- Limitting the inrush current
- Reverse current protection
- Raid
- Hard drive
- Active current limit
- Server backplane system
- Automatic restart after load failure
- Automotive circuits
- ISDN system
