LTC4217IFE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Thermal Limit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~26.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4217 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 26.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Current - Output (Max) | 2A |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 3mA |
| Internal Switch(s) | Yes |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO |
| Feature Pins | FB, /FLT, IMON, ISET, OV, PG, TIMER, UV |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC4217IFE#TRPBF Overview
The 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package contains it.Currently, there are 1 channels accessible.Hot-swappable device comes in the shape of a Tape & Reel (TR).Hot-swappable device terminates wHot-swappable deviceh 20 in total.The terminal position of the device is DUAL.In total, it has 20 pins.With a supply voltage of 12V, high efficiency is possible.According to Surface Mount, it has been set up.Hot Swap Controller, Monitor?is?the?classification?for?this?electrical?component.If you want reliable performance, you should set the temperature to -40°C~85°C.General Purpose applications can be downloaded from the device.The article is featured in Thermal Limit.As long as you have a 2.9V~26.5VV power source, it should work.This number is a member of the LTC4217 family.In Power Management Circuits, this gadget is self-contained.Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO features are programmable.The current supply of 1.6mA.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 2.9V.Vsup (maximum supply voltage) is set to 26.5V.Hot Swap can operate at a maximum supply current of 3mA.2AV is the maximum output of the device.
LTC4217IFE#TRPBF Features
The terminal position of 20
Features of Thermal Limit
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
LTC4217IFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4217IFE#TRPBF hot swap controllers applications.
- Telecommunications
- Raid
- Base station power distribution system
- Network switch
- Storage network
- Network switches
- Central office switching systems
- Continuous monitoring of device temperature
- Redundant Array of Disks (RAID)
- Circuit breakers for high-side circuits
