LTC4218CDHC-12#PBF
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Max Output Voltage | 800mV |
| Max Input Voltage | 26.5V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 12V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | FB, /FLT, IMON, ISET, OV, PG, SOURCE, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | OVP, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | ATCA, MicroTCA™ |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~26.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4218 |
| Pin Count | 16 |
| Output Voltage | 12V |
| Max Output Current | 10μA |
LTC4218CDHC-12#PBF Overview
As part of the 16-WFDFN Exposed Pad package, it is included.At present, 1 channels are available.A Tube-shaped package holds it.The terminations total 16.Device position DUAL is its terminal position.A total of 16 pins are present on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.The way it's set up is the way Surface Mount wants it.Electric components of this type are classified as Hot Swap Controller, Monitor.If you want reliable performance, you should set the temperature to 0°C~70°C.The device has ATCA, MicroTCA? applicationsIn OVP, UVLO, it is featured.In theory, it should work as long as the power source has a 2.9V~26.5VV input.There are numbers in the LTC4218 family that include it.A 16 pin is used for operation.Power Management Circuits contains this gadget all by itself.Auto Retry, Current Limit, Fault Timeout, Latched Fault is its programmable feature.Presently, there is a limited supply of 1.6mA.The supply voltage (Vsup) should be kept above 2.9V for normal operation.Hot Swap can operate at a maximum supply current of 5mA.In order to meet the operation criteria, the maximum output current must be reduced to 10μA.High efficiency is feasible with a 12V output voltage.
LTC4218CDHC-12#PBF Features
The terminal position of 16
Features of OVP, UVLO
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault
Output voltage of 12V
LTC4218CDHC-12#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4218CDHC-12#PBF hot swap controllers applications.
- Redundant negative voltage supplies
- High power circuit board
- Continuous monitoring of device temperature
- Electric vehicle
- Circuit breakers for electronic circuits
- Industrial
- Current monitoring
- Load transient protection
- Temperature monitor output
- Network switch
