LTC4218IDHC-12#PBF
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 12V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | FB, /FLT, IMON, ISET, OV, PG, SOURCE, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | OVP, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | ATCA, MicroTCA™ |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~26.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4218 |
| Pin Count | 16 |
| Output Voltage | 30V |
| Max Output Current | 10μA |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Max Output Voltage | 800mV |
| Max Input Voltage | 26.5V |
LTC4218IDHC-12#PBF Overview
The 16-WFDFN Exposed Pad package contains it.Currently, 1 channels can be accessed.Tube-shaped packaging is used for this product.This device has a total of 16 terminations.Device DUAL is in the terminal position.A total of 16 pins are present on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller, Monitor electrical component.If you want reliable performance, you should set the temperature to -40°C~85°C.Application ATCA, MicroTCA? is available on the device.The article is featured in OVP, UVLO.In theory, it should work as long as the power source has a 2.9V~26.5VV input.LTC4218 numbers belong to this family.This device operates by using 16 pins.A gadget like this is self-contained in Power Management Circuits.There are Auto Retry, Current Limit, Fault Timeout, Latched Fault features that can be programmed.Presently, there is a limited supply of 1.6mA.The supply voltage (Vsup) should be kept above 2.9V for normal operation.A maximum supply current of 5mA is required for the device to operate.10μA is the maximum output current required to meet the operation criteria.30V output voltage enables high efficiency.
LTC4218IDHC-12#PBF Features
The terminal position of 16
Features of OVP, UVLO
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault
Output voltage of 30V
LTC4218IDHC-12#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4218IDHC-12#PBF hot swap controllers applications.
- Redundant-array-of-independent-disk (RAID) storage
- Circuit breakers for high-side circuits
- Undervoltage protection
- Circuit power protectors
- CompactPCI
- Automatic restart after load failure
- Continuous monitoring of device temperature
- PC board hot swap insertion and removal
- Network switch
- Safe board insertion and extraction
