LTC4219CDHC-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4219 |
| Pin Count | 16 |
| Output Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Current - Output (Max) | 5.6A |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 15V |
| Internal Switch(s) | Yes |
| Programmable Features | Current Limit, Fault Timeout |
| Feature Pins | /EN1, /EN2, FB, /FLT, IMON, ISET, /PG, TIMER |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4219CDHC-5#PBF Overview
You get it with the 16-WFDFN Exposed Pad package.At the moment, 1 channels are accessible.The package resembles a Tube.Total terminations are 16.The terminal position of the device is DUAL.16 pins make up the entire device.With a supply voltage of 12V, high efficiency is possible.As Surface Mount would say, it's set up like that.Electric components of this type are classified as Hot Swap Controller, Monitor.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.The device has General Purpose applicationsAs you can see in Thermal Limit, UVLO, it's featured.Using a 2.9V~15VV power source should be able to power the device.Hot-swappable device belongs to the LTC4219 family of numbers.16 pins are used in operation.Power Management Circuits contains this gadget on its own.Current Limit, Fault Timeout is the number of features it can be programmed with.In the present, there is a shortage of 1.6mA.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 2.9V.A maximum supply current of 3mA is required for the device to operate.5.6AV is the device's maximum output.A 5V output voltage allows for high efficiency.
LTC4219CDHC-5#PBF Features
The terminal position of 16
Features of Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 5V
LTC4219CDHC-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4219CDHC-5#PBF hot swap controllers applications.
- Reverse current protection
- Network switches
- Power supply hotswap & inrush control
- Undervoltage protection
- Server backplane system
- Firewire
- Thermal limitation
- Raid
- ISDN system
- Telecom server
