LTC4219IDHC-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4219 |
| Pin Count | 16 |
| Output Voltage | 4.35V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Current - Output (Max) | 5.6A |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 5V |
| Internal Switch(s) | Yes |
| Programmable Features | Current Limit, Fault Timeout |
| Feature Pins | /EN1, /EN2, FB, /FLT, IMON, ISET, /PG, TIMER |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4219IDHC-5#PBF Overview
You get it with the 16-WFDFN Exposed Pad package.1 channels are currently available.Tube-shaped packaging is used.There are a total of 16 terminations on it.There is a DUAL terminal position on the device.In total, there are 16 pins on it.High efficiency can be achieved when the supply voltage is 12V.According to Surface Mount, it has been set up.This electrical component belongs to the Hot Swap Controller, Monitor classification.If you want reliable performance, you should set the temperature to -40°C~85°C.Application General Purpose is available on the device.A feature of Thermal Limit, UVLO describes it.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 2.9V~15VV.LTC4219 numbers belong to this family.In order to operate, 16 pins are used.The gadget in Power Management Circuits is self-contained.Current Limit, Fault Timeout is the number of features it can be programmed with.Presently, there is a limited supply of 1.6mA.For normal operation, the supply voltage (Vsup) should be kept above 2.9V in order to maintain a constant level of power.Hot Swap can operate at a maximum supply current of 3mA.5.6AV is the device's maximum output.In the case of a 4.35V output voltage, high efficiency can be achieved.
LTC4219IDHC-5#PBF Features
The terminal position of 16
Features of Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 4.35V
LTC4219IDHC-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4219IDHC-5#PBF hot swap controllers applications.
- PC board hot swap insertion and removal
- Temperature monitor output
- Industrial
- Board or blade insertion into live backplanes
- Microcontrollers
- Network switch
- Redundant Array of Disks (RAID)
- Undervoltage protection
- Limitting the inrush current
- Switch
