LTC4228IGN-1

Tube Obsolete 2 Surface Mount Hot Swap Controllers 2.5mA mA Latched Fault, UVLO 28-SSOP (0.154, 3.90mm Width) 2 General Purpose Hot Swap Controller, OR Controller

Manufacturer: Linear Technology/Analog Devices
Nocochips NO: 471-LTC4228IGN-1
Package: 28-SSOP (0.154, 3.90mm Width)
Datasheet: -
Stock: 880
Description: Tube Obsolete 2 Surface Mount Hot Swap Controllers 2.5mA mA Latched Fault, UVLO 28-SSOP (0.154, 3.90mm Width) 2 General Purpose Hot Swap Controller, OR Controller (Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Feature	Latched Fault, UVLO
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Hot Swap Controller, OR Controller
Terminal Finish	Matte Tin (Sn)
Applications	General Purpose
Subcategory	Power Management Circuits
Technology	CMOS
Voltage - Supply	2.9V~18V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	12V
Terminal Pitch	0.635mm
Pin Count	28
Supply Voltage-Max (Vsup)	18V
Number of Channels	2
Adjustable Threshold	YES
Current - Supply	2.5mA
Supply Current-Max (Isup)	5mA
Internal Switch(s)	No
Programmable Features	Current Limit, Fault Timeout, Slew Rate
Height Seated (Max)	1.75mm
Length	9.893mm
Width	3.899mm
RoHS Status	Non-RoHS Compliant

LTC4228IGN-1 Overview

It's included in the 28-SSOP (0.154, 3.90mm Width) package.As of now, 2 channels are available.There is a Tube-shaped package for it.Hot-swappable device terminates wHot-swappable deviceh 28 in total.Device position DUAL is its terminal position.The device consists of a total of 28 pins.With a supply voltage of 12V, high efficiency is possible.Surface Mount sets it up.The electrical component in question falls into the classification Hot Swap Controller, OR Controller.For reliable performance, the temperature should be set to -40°C~85°C.General Purpose applications are available on the device.An article about it appears in Latched Fault, UVLO.The device should be able to be powered by a 2.9V~18VV power source.There is nothing else in Power Management Circuits but this gadget.Current Limit, Fault Timeout, Slew Rate is its programmable feature.In the present, there is a shortage of 2.5mA.Vsup (maximum supply voltage) is set to 18V.Hot Swap can operate at a maximum supply current of 5mA.