banner_page

LTC4230IGN#PBF

Tube Active 3 Surface Mount Hot Swap Controllers 1.8mA mA 20-SSOP (0.154, 3.90mm Width) 3 General Purpose Hot Swap Controller


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4230IGN#PBF
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 791
  • Description: Tube Active 3 Surface Mount Hot Swap Controllers 1.8mA mA 20-SSOP (0.154, 3.90mm Width) 3 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 2002
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Matte Tin (Sn)
Applications General Purpose
Subcategory Power Management Circuits
Technology CMOS
Voltage - Supply 1.7V~16.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Depth 3.99mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC4230
Pin Count 20
Supply Voltage-Max (Vsup) 16.5V
Supply Voltage-Min (Vsup) 2.7V
Number of Channels 3
Max Supply Current 3mA
Adjustable Threshold YES
Current - Supply 1.8mA
Internal Switch(s) No
Programmable Features Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO
Feature Pins /FAULT, FB1, FB2, FB3, FILTER, ON, RESET1, RESET2, RESET3, TIMER
Height 1.5mm
Length 8.74mm
Width 3.99mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LTC4230IGN#PBF Overview


You can find it in the 20-SSOP (0.154, 3.90mm Width) package.Hot-swappable device is currently possible to access 3 channels.There is a Tube-shaped package for it.The terminations total 20.The terminal position of the device is DUAL.A total of 20 pins are present on it.A supply voltage of 3.3V allows for high efficiency.This is set up in the same way as Surface Mount.This electrical component belongs to the Hot Swap Controller classification.To ensure reliable operation, set the temperature to -40°C~85°C.Devices with General Purpose applications are available.Hot-swappable device should work if you use a 1.7V~16.5VV power source.Numbers in the LTC4230 family include it.This device uses 20 pins for operation.The gadget in Power Management Circuits is self-contained.Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO is the number of features it can be programmed with.This is the current supply of 1.8mA.To ensure normal operation, the supply voltage (Vsup) must be kept above 2.7V.Vsup is set to 16.5V, the maximum supply voltage.Its maximum current requirement is 3mA.

LTC4230IGN#PBF Features


The terminal position of 20
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO

LTC4230IGN#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC4230IGN#PBF hot swap controllers applications.

  • Hard drive
  • Automotive circuits
  • Central office switching systems
  • ISDN system
  • Short-circuit protection in real time
  • Inrush current control
  • Solid state circuit breakers
  • Automatic restart after load failure
  • Distributed power systems
  • Remote access server

Write a review

Note: HTML is not translated!
    Bad           Good