banner_page

LTC4241CGN#PBF

Tube Active 5 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit, UVLO 20-SSOP (0.154, 3.90mm Width) 5 PCI, PCI-X Hot Swap Controller


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4241CGN#PBF
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 100
  • Description: Tube Active 5 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit, UVLO 20-SSOP (0.154, 3.90mm Width) 5 PCI, PCI-X Hot Swap Controller (Kg)

Details

Tags

Parameters
Base Part Number LTC4241
Pin Count 20
Output Voltage 14V
Supply Voltage-Max (Vsup) 12.6V
Supply Voltage-Min (Vsup) 11.4V
Number of Channels 5
Adjustable Threshold NO
Supply Current-Max (Isup) 8mA
Nominal Input Voltage 12V
Internal Switch(s) Both
Programmable Features Current Limit, Fault Timeout, Slew Rate
Feature Pins AUXON, /FAULT, ON, /PWRGD, TIMER
Height Seated (Max) 1.727mm
Length 8.74mm
Width 3.899mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 20
Operating Temperature 0°C~70°C
Packaging Tube
Published 2003
JESD-609 Code e3
Feature Latched Fault, Thermal Limit, UVLO
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Matte Tin (Sn)
Applications PCI, PCI-X
Additional Feature ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY
Subcategory Power Management Circuits
Technology CMOS
Voltage - Supply 3.3V 5V ±12V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Depth 3.99mm
Time@Peak Reflow Temperature-Max (s) 30

LTC4241CGN#PBF Overview


You can find it in the 20-SSOP (0.154, 3.90mm Width) package.Currently, there are 5 channels accessible.Tube-shaped packaging is used.This device has a total of 20 terminations.The terminal position of the device is DUAL.Hot-swappable device has a total of 20 pins on Hot-swappable device.With a supply voltage of 12V, high efficiency is possible.This is set up in the same way as Surface Mount.In electrical components, Hot Swap Controller is the classification.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.PCI, PCI-X applications can be downloaded from the device.Hot-swappable device is featured in Latched Fault, Thermal Limit, UVLO.If the power source is 3.3V 5V ±12VV, it should work fine.Hot-swappable device is included in the LTC4241 family of numbers.20 pins are used in operation.There is nothing else in Power Management Circuits but this gadget.The programmable features of this device are Current Limit, Fault Timeout, Slew Rate.Hot-swappable device is important that the supply voltage (Vsup) is kept above 11.4V for normal operation of the device.Hot-swappable device is set to 12.6V for the maximum supply voltage.The maximum operating current is 8mA.Using this device, you can also produce ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY.Hot Swap is possible to achieve high efficiency wHot Swaph a 14V output voltage.

LTC4241CGN#PBF Features


The terminal position of 20
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 14V

LTC4241CGN#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC4241CGN#PBF hot swap controllers applications.

  • Temperature monitor output
  • Industrial application
  • Hard drive
  • Redundant Array of Disks (RAID)
  • Industrial
  • Firewire
  • Network switch
  • Raid
  • Active current limit
  • ISDN system

Write a review

Note: HTML is not translated!
    Bad           Good