banner_page

LTC4241CGN#TRPBF

Tape & Reel (TR) Active 5 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit, UVLO 20-SSOP (0.154, 3.90mm Width) 5 PCI, PCI-X Hot Swap Controller


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4241CGN#TRPBF
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 517
  • Description: Tape & Reel (TR) Active 5 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit, UVLO 20-SSOP (0.154, 3.90mm Width) 5 PCI, PCI-X Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Feature Latched Fault, Thermal Limit, UVLO
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Matte Tin (Sn)
Applications PCI, PCI-X
Additional Feature ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY
Technology CMOS
Voltage - Supply 3.3V 5V ±12V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC4241
Pin Count 20
JESD-30 Code R-PDSO-G20
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 12.6V
Supply Voltage-Min (Vsup) 11.4V
Number of Channels 5
Adjustable Threshold NO
Internal Switch(s) Both
Programmable Features Current Limit, Fault Timeout, Slew Rate
Feature Pins AUXON, /FAULT, ON, /PWRGD, TIMER
Height Seated (Max) 1.727mm
Width 3.899mm
RoHS Status ROHS3 Compliant

LTC4241CGN#TRPBF Overview


In the 20-SSOP (0.154, 3.90mm Width) package you will find it.At the moment, 5 channels are accessible.The package resembles a Tape & Reel (TR).20 terminations are present in total.In this case, the device is located at terminal DUAL.There are a total of 20 pins on it.An efficient supply voltage is possible with 12V.Surface Mount is set up this way.The electrical component in question falls into the classification Hot Swap Controller.Ensure reliable operation by setting the temperature to 0°C~70°C.There are PCI, PCI-X applications available for the device.A feature of Latched Fault, Thermal Limit, UVLO describes it.Using a 3.3V 5V ±12VV power source should be able to power the device.The LTC4241 family includes it.There are Current Limit, Fault Timeout, Slew Rate programmable features on this device.For normal operation, the supply voltage (Vsup) should be kept above 11.4V in order to maintain a constant level of power.Hot-swappable device is set to 12.6V for the maximum supply voltage.By using this device, it is also possible to produce ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY.

LTC4241CGN#TRPBF Features


The terminal position of 20
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate

LTC4241CGN#TRPBF Applications


There are a lot of Linear Technology/Analog Devices LTC4241CGN#TRPBF hot swap controllers applications.

  • Loads
  • Industrial application
  • Base station power distribution system
  • Undervoltage protection
  • High power circuit board
  • Short-circuit protection in real time
  • Switch
  • Telecom server
  • Solid state circuit breakers
  • ISDN system

Write a review

Note: HTML is not translated!
    Bad           Good