LTC4242CG#PBF
| Parameters | |
|---|---|
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.7V~14.4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4242 |
| Pin Count | 36 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 6 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 4mA |
| Internal Switch(s) | Both |
| Programmable Features | Auto Retry, Current Limit, Latched Fault, Slew Rate |
| Feature Pins | /AUXFAULT1, /AUXFAULT2, AUXON1, AUXON2, /EN1, /EN2, /FAULT1, /FAULT2, FON1, FON2, ON1, ON2, /PGOOD1, /PGOOD2 |
| Height Seated (Max) | 2mm |
| Length | 12.8mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Fault Timeout, Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | PCI Express® |
| HTS Code | 8542.39.00.01 |
LTC4242CG#PBF Overview
It's included in the 36-SSOP (0.209, 5.30mm Width) package.At the moment, 6 channels are accessible.It's?packaged?in?the?form?of?a?Tube.In total, it has 36 terminations.Device position DUAL is its terminal position.A total of 36 pins are present on it.High efficiency is possible at a voltage of 3.3V.According to Surface Mount, it has been set up.In electrical components, Hot Swap Controller is the classification.A reliable operation requires the temperature to be set to 0°C~70°C.Application PCI Express? is available on the device.There is a mention of it in Fault Timeout, Thermal Limit, UVLO.Using a 2.7V~14.4VV power source should be able to power the device.In the LTC4242 family, it appears as a number.As far as Power Management Circuits is concerned, this gadget is self-contained.Programmable features include Auto Retry, Current Limit, Latched Fault, Slew Rate.Presently, there is a limited supply of 1.6mA.For normal operation, Vsup should be maintained above 2.7V.There is a value of 6V set for Vsup (maximum supply voltage).Part 3.312V uses a power supply that has a voltage.4mA is its maximum supply current.
LTC4242CG#PBF Features
The terminal position of 36
Features of Fault Timeout, Thermal Limit, UVLO
Programmable features of Auto Retry, Current Limit, Latched Fault, Slew Rate
LTC4242CG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4242CG#PBF hot swap controllers applications.
- Disconnect faulty loads before supply voltage drops
- Circuit breakers for electronic circuits
- High power circuit board
- Server backplane system
- DC boost circuit
- Comprehensive analog and digital capabilities
- Load transient protection
- Solid state circuit breakers
- Thermal limitation
- Board or blade insertion into live backplanes
