LTC4242CG#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Fault Timeout, Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | PCI Express® |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.7V~14.4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4242 |
| Pin Count | 36 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 6 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 4mA |
| Internal Switch(s) | Both |
| Programmable Features | Auto Retry, Current Limit, Latched Fault, Slew Rate |
| Feature Pins | /AUXFAULT1, /AUXFAULT2, AUXON1, AUXON2, /EN1, /EN2, /FAULT1, /FAULT2, FON1, FON2, ON1, ON2, /PGOOD1, /PGOOD2 |
| Height Seated (Max) | 2mm |
| Length | 12.8mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC4242CG#TRPBF Overview
You can find it in the 36-SSOP (0.209, 5.30mm Width) package.In the current state, 6 channels are accessible.The package resembles a Tape & Reel (TR).There are 36 terminations in total.In this case, the device is located at terminal DUAL.36 pins make up its total.High efficiency can be achieved with a voltage supply of 3.3V.The way it's set up is the way Surface Mount wants it.This electrical component is classified as Hot Swap Controller.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.Devices with PCI Express? applications are available.As you can see in Fault Timeout, Thermal Limit, UVLO, it's featured.Using a 2.7V~14.4VV power source should be able to power the device.This number is a member of the LTC4242 family.In Power Management Circuits, this gadget is self-contained.Hot-swappable device has Auto Retry, Current Limit, Latched Fault, Slew Rate programmable features.1.6mA is currently in short supply.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 2.7V.6V is set for Vsup (maximum supply voltage).Hot-swappable device is 3.312V type power supplies that are used in this part.A maximum supply current of 4mA is required for the device to operate.
LTC4242CG#TRPBF Features
The terminal position of 36
Features of Fault Timeout, Thermal Limit, UVLO
Programmable features of Auto Retry, Current Limit, Latched Fault, Slew Rate
LTC4242CG#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4242CG#TRPBF hot swap controllers applications.
- Continuous monitoring of device temperature
- Current limit and current foldback limit functions
- Industrial application
- Temperature monitor output
- Redundant-array-of-independent-disk (RAID) storage
- ISDN system
- Firewire
- Solid state circuit breakers
- Other forms of communications infrastructure
- Datacom
