LTC4242IG#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Fault Timeout, Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | PCI Express® |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.7V~14.4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4242 |
| Pin Count | 36 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 6 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 4mA |
| Internal Switch(s) | Both |
| Programmable Features | Auto Retry, Current Limit, Latched Fault, Slew Rate |
| Feature Pins | /AUXFAULT1, /AUXFAULT2, AUXON1, AUXON2, /EN1, /EN2, /FAULT1, /FAULT2, FON1, FON2, ON1, ON2, /PGOOD1, /PGOOD2 |
| Height Seated (Max) | 2mm |
| Length | 12.8mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC4242IG#TRPBF Overview
You can find it in the 36-SSOP (0.209, 5.30mm Width) package.Currently, 6 channels can be accessed.It's packaged in a Tape & Reel (TR) shape.Total terminations are 36.A device's terminal position is DUAL.Total number of pins is 36.The supply voltage 3.3V is necessary for high efficiency.Surface Mount sets it up.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.The temperature should be set to -40°C~85°C to ensure reliable functioning.Application PCI Express? is available on the device.The article is featured in Fault Timeout, Thermal Limit, UVLO.The device should be able to be powered by a 2.7V~14.4VV power source.Hot-swappable device belongs to the LTC4242 family of numbers.As far as Power Management Circuits is concerned, this gadget is self-contained.Auto Retry, Current Limit, Latched Fault, Slew Rate is the number of features it can be programmed with.In the present, there is a shortage of 1.6mA.For normal operation, Vsup should be kept above 2.7V.Hot-swappable device is set to 6V for the maximum supply voltage.Hot-swappable device has a 3.312V power supply, which is the power supply used in the part.A maximum supply current of 4mA is required for the device to operate.
LTC4242IG#TRPBF Features
The terminal position of 36
Features of Fault Timeout, Thermal Limit, UVLO
Programmable features of Auto Retry, Current Limit, Latched Fault, Slew Rate
LTC4242IG#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4242IG#TRPBF hot swap controllers applications.
- Network router
- Thermal limitation
- USB interface
- Datacom
- Raid
- Server backplane system
- Power supply hotswap & inrush control
- PC board hot swap insertion and removal
- Hard drive
- Limitting the inrush current
