banner_page

LTC4245CG#TRPBF

Tape & Reel (TR) Active 4 Surface Mount Hot Swap Controllers I2C, UVLO 36-SSOP (0.209, 5.30mm Width) 4 CompactPCI?, PCIe, CompactTCA Hot Swap Controller, Monitor


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4245CG#TRPBF
  • Package: 36-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 710
  • Description: Tape & Reel (TR) Active 4 Surface Mount Hot Swap Controllers I2C, UVLO 36-SSOP (0.209, 5.30mm Width) 4 CompactPCI?, PCIe, CompactTCA Hot Swap Controller, Monitor (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 36-SSOP (0.209, 5.30mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Feature I2C, UVLO
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 36
ECCN Code EAR99
Type Hot Swap Controller, Monitor
Terminal Finish Matte Tin (Sn)
Applications CompactPCI™, PCIe, CompactTCA
Additional Feature ALSO REQUIRES A 3.3V, 5V, -12V SUPPLY
Subcategory Power Management Circuits
Technology CMOS
Voltage - Supply 3.3V 5V ±12V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC4245
Pin Count 36
JESD-30 Code R-PDSO-G36
Power Supplies 3.35+-12V
Number of Channels 4
Adjustable Threshold YES
Supply Current-Max (Isup) 5mA
Internal Switch(s) No
Programmable Features Auto Retry, Current Limit, Fault Timeout, Latched Fault
Feature Pins ALERT#, BD_SEL#, CFG, GPIO1, HEALTHY#, INTVCC, ON, PGI, PRECHARGE, SS, TIMER
Height Seated (Max) 2mm
Length 12.8mm
Width 5.3mm
RoHS Status ROHS3 Compliant

LTC4245CG#TRPBF Overview


You can find it in the 36-SSOP (0.209, 5.30mm Width) package.4 channels are currently available.There is a Tape & Reel (TR)-shaped package for it.In total, it has 36 terminations.There is a DUAL terminal position on the device.In total, there are 36 pins on it.High efficiency can be achieved by using 12V as supply voltage.It's?set?up?in?the?way?of?Surface Mount.Electrical components classified as Hot Swap Controller, Monitor are referred to as Hot Swap Controller, Monitor components.For reliable performance, the temperature should be set to 0°C~70°C.A CompactPCI?, PCIe, CompactTCA application is available for the device.There is a reference to it in I2C, UVLO.In the case of a 3.3V 5V ±12VV power source, it should work just fine.Hot-swappable device belongs to the LTC4245 family of numbers.The gadget in Power Management Circuits is self-contained.Programmable features include Auto Retry, Current Limit, Fault Timeout, Latched Fault.Hot-swappable device is important to note that the part has a power supply 3.35+-12V.The maximum supply current for operation is 5mA.A ALSO REQUIRES A 3.3V, 5V, -12V SUPPLY can also be produced with the help of this device.

LTC4245CG#TRPBF Features


The terminal position of 36
Features of I2C, UVLO
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault

LTC4245CG#TRPBF Applications


There are a lot of Linear Technology/Analog Devices LTC4245CG#TRPBF hot swap controllers applications.

  • Disconnect faulty loads before supply voltage drops
  • Short circuit protection
  • Distributed power systems
  • Modern analog communication
  • ISDN system
  • Data communication systems
  • Telecommunications
  • Microcontrollers
  • Redundant-array-of-independent-disk (RAID) storage
  • Industrial computers and servers

Write a review

Note: HTML is not translated!
    Bad           Good