banner_page

LTC4252-1IMS8#PBF

Tube Active 1 Surface Mount Hot Swap Controllers 800μA mA Latched Fault 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 -48V Hot Swap Controller


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4252-1IMS8#PBF
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 336
  • Description: Tube Active 1 Surface Mount Hot Swap Controllers 800μA mA Latched Fault 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 -48V Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tube
Published 2013
JESD-609 Code e3
Feature Latched Fault
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Matte Tin (Sn)
Applications -48V
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 13V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC4252
Pin Count 8
JESD-30 Code S-PDSO-G8
Number of Channels 1
Adjustable Threshold YES
Current - Supply 800μA
Supply Current-Max (Isup) 2mA
Internal Switch(s) No
Programmable Features Current Limit, Fault Timeout, OVP, UVLO
Feature Pins DRAIN, SS, TIMER, (UV, OV)
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant

LTC4252-1IMS8#PBF Overview


As part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.At the moment, 1 channels are accessible.It's?packaged?in?the?form?of?a?Tube.In total, it has 8 terminations.In this case, the device is located at terminal DUAL.In total, there are 8 pins on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 13V.As Surface Mount would say, it's set up like that.Hot Swap Controller?is?the?classification?for?this?electrical?component.For reliable performance, the temperature should be set to -40°C~85°C.-48V applications can be downloaded from the device.The article is featured in Latched Fault.There are numbers in the LTC4252 family that include it.The gadget in Power Management Circuits is self-contained.Programmable features include Current Limit, Fault Timeout, OVP, UVLO.Hot-swappable device is estimated that there is a current supply of 800μA.Its maximum supply current for operation is 2mA.

LTC4252-1IMS8#PBF Features


The terminal position of 8
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO

LTC4252-1IMS8#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC4252-1IMS8#PBF hot swap controllers applications.

  • Base station
  • Networking
  • DC boost circuit
  • Automatic restart after load failure
  • Base station power distribution system
  • Short circuit protection
  • High power circuit board
  • Identify faulty boards
  • Switch
  • Datacom

Write a review

Note: HTML is not translated!
    Bad           Good