LTC4260CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | I2C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 8.5V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.635mm |
| Depth | 3.99mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4260 |
| Pin Count | 24 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| Supply Current-Max (Isup) | 5mA |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO |
| Feature Pins | ADIN, /ALERT, /BD_PRST, FB, GPIO, INTVCC, ON, OV, SOURCE, TIMER, UV |
| Length | 8.74mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4260CGN#PBF Overview
The 24-SSOP (0.154, 3.90mm Width) package includes it.As of now, 1 channels are available.In the form of a Tube, it is packaged.Hot-swappable device has a total of 24 terminations.There is a DUAL terminal position on the device.The device consists of a total of 24 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 48V.Surface Mount is set up this way.Electrical components classified as Hot Swap Controller, Monitor are referred to as Hot Swap Controller, Monitor components.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.Hot-swappable device has General Purpose applications.As you can see in I2C, it's featured.Hot-swappable device should be able to work wHot-swappable deviceh a 8.5V~80VV power source.This number is a member of the LTC4260 family.This device operates by using 24 pins.The gadget in Power Management Circuits is self-contained.Among its programmable features are Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO.The current supply of 2mA.The supply voltage (Vsup) should be kept above 8.5V for normal operation.80V (maximum supply voltage) is set.Hot-swappable device is important to note that the part has a power supply 48V.There is a maximum supply current of 5mA for its operation.
LTC4260CGN#PBF Features
The terminal position of 24
Features of I2C
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO
LTC4260CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4260CGN#PBF hot swap controllers applications.
- Current limit and current foldback limit functions
- Short-circuit protection in real time
- Network router
- Safe board insertion and extraction
- Automotive circuits
- Server backplane system
- Electric vehicle
- Short circuit protection
- Servers
- ISDN system
