LTC4260CUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | I2C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 8.5V~80V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Depth | 5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4260 |
| Pin Count | 32 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| Supply Current-Max (Isup) | 5mA |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO |
| Feature Pins | ADIN, /ALERT, /BD_PRST, FB, GPIO, INTVCC, ON, OV, SOURCE, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4260CUH#PBF Overview
You get it with the 32-WFQFN Exposed Pad package.As of now, 1 channels are available.There is a Tube-shaped package for it.In total, it has 32 terminations.Device QUAD is located at the terminal position.The device has a total of 32 pins.An efficient supply voltage is possible with 48V.Surface Mount sets it up.Electric components of this type are classified as Hot Swap Controller, Monitor.A temperature setting of 0°C~70°C will ensure reliable operation.General Purpose applications are available on the device.The article appears in I2C.With a 8.5V~80VV power source, it should work.Hot-swappable device is included in the LTC4260 family of numbers.A 32 pin is used for operation.A gadget like this is self-contained in Power Management Circuits.Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO features are programmable.This is the current supply of 2mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 8.5V so that the device can function normally.There is a value of 80V set for Vsup (maximum supply voltage).The power supply of the part is referred to as 48V.The maximum supply current it requires to operate is 5mA.
LTC4260CUH#PBF Features
The terminal position of 32
Features of I2C
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO
LTC4260CUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4260CUH#PBF hot swap controllers applications.
- Server backplane system
- Industrial computers and servers
- Hard drive
- Avionics systems
- Distributed power systems
- Microcontrollers
- Power supply hotswap & inrush control
- Current limit and current foldback limit functions
- Base station
- USB interface
