LTC4260IGN#PBF
| Parameters | |
|---|---|
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 8.5V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.635mm |
| Depth | 3.99mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4260 |
| Pin Count | 24 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| Supply Current-Max (Isup) | 5mA |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO |
| Feature Pins | ADIN, /ALERT, /BD_PRST, FB, GPIO, INTVCC, ON, OV, SOURCE, TIMER, UV |
| Length | 8.74mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | I2C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LTC4260IGN#PBF Overview
You get it with the 24-SSOP (0.154, 3.90mm Width) package.1 channels are currently available.The package resembles a Tube.In total, it has 24 terminations.A device's terminal position is DUAL.24 pins make up the entire device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 48V.There is a Surface Mount-like arrangement.Electrical components classified as Hot Swap Controller, Monitor are referred to as Hot Swap Controller, Monitor components.The temperature should be set to -40°C~85°C to ensure reliable functioning.Hot-swappable device has General Purpose applications.In I2C, it is featured.With a 8.5V~80VV power source, it should work.The number LTC4260 belongs to the LTC4260 family.Operating the device requires 24 pins.This gadget is self-contained in?Power Management Circuits.Hot-swappable device has Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO programmable features.Presently, there is a limited supply of 2mA.For normal operation, Vsup should be maintained above 8.5V.80V (maximum supply voltage) is set.Part 48V is associated with power supplies.Hot Swap can operate at a maximum supply current of 5mA.
LTC4260IGN#PBF Features
The terminal position of 24
Features of I2C
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO
LTC4260IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4260IGN#PBF hot swap controllers applications.
- Supply voltage monitoring
- Redundant negative voltage supplies
- Modern analog communication
- Base station
- Servers
- Networking
- Solid state circuit breakers
- Loads
- Circuit breakers for high-side circuits
- Avionics systems
