LTC4260IGN#TRPBF
| Parameters | |
|---|---|
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | I2C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 8.5V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4260 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| Supply Current-Max (Isup) | 5mA |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO |
| Feature Pins | ADIN, /ALERT, /BD_PRST, FB, GPIO, INTVCC, ON, OV, SOURCE, TIMER, UV |
LTC4260IGN#TRPBF Overview
You can find it in the 24-SSOP (0.154, 3.90mm Width) package.Currently, 1 channels can be accessed.Tape & Reel (TR)-shaped packaging is used for this product.24 terminations are present in total.The terminal position of the device is DUAL.24 pins make up the entire device.High efficiency can be achieved by using 48V as supply voltage.The way it's set up is the way Surface Mount wants it.In electrical components, Hot Swap Controller, Monitor is the classification.If you want reliable performance, you should set the temperature to -40°C~85°C.There are General Purpose applications available for the device.I2C features it.In the case of a 8.5V~80VV power source, it should work just fine.Hot-swappable device is included in the LTC4260 family of numbers.The gadget in Power Management Circuits is self-contained.There are Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO features that can be programmed.Presently, there is a limited supply of 2mA.To ensure normal operation, the supply voltage (Vsup) must be kept above 8.5V.There is a value of 80V set for Vsup (maximum supply voltage).This part is powered by a 48V-shaped power supply.This device's maximum supply current is 5mA.
LTC4260IGN#TRPBF Features
The terminal position of 24
Features of I2C
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO
LTC4260IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4260IGN#TRPBF hot swap controllers applications.
- Overcurrent protection
- Load transient protection
- Server backplane system
- Backplane
- Safe board insertion and extraction
- Network switches
- Solid state circuit breakers
- Thermal limitation
- Microcontrollers
- Automatic restart after load failure
