LTC4260ISW#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | I2C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 8.5V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Depth | 7.6mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4260 |
| Pin Count | 24 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| Supply Current-Max (Isup) | 5mA |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO |
| Feature Pins | ADIN, /ALERT, /BD_PRST, FB, GPIO, INTVCC, ON, SOURCE, TIMER, UV |
| Height Seated (Max) | 2.642mm |
| Length | 15.6mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4260ISW#PBF Overview
It's included in the 24-SOIC (0.295, 7.50mm Width) package.Channel 1 is currently available.It's packaged in a Tube shape.This device has a total of 24 terminations.Its terminal position is DUAL.In total, there are 24 pins on it.High efficiency can be achieved with a voltage supply of 48V.Surface Mount is set up this way.Hot-swappable device is classified as a Hot Swap Controller, Monitor electrical component.Ensure reliable operation by setting the temperature to -40°C~85°C.General Purpose applications are available on the device.An article about it appears in I2C.As long as you have a 8.5V~80VV power source, it should work.LTC4260 is a family of numbers.Hot-swappable device is necessary to use 24 pins in order to operate the device.As far as Power Management Circuits is concerned, this gadget is self-contained.Hot-swappable device has Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO programmable features.The current supply of 2mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 8.5V so that the device can function normally.80V (maximum supply voltage) is set.In terms of power supplies, it is the character 48V that appears on the part.A maximum supply current of 5mA is required for the device to operate.
LTC4260ISW#PBF Features
The terminal position of 24
Features of I2C
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO
LTC4260ISW#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4260ISW#PBF hot swap controllers applications.
- Limitting the inrush current
- Electric vehicle
- Loads
- Comprehensive analog and digital capabilities
- Redundant-array-of-independent-disk (RAID) storage
- Safe board insertion and extraction
- CompactPCI
- Disconnect faulty loads before supply voltage drops
- Industrial high-side switches
- Base station
