LTC4265CDE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 37.2V~60V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC4265 |
| Pin Count | 12 |
| Output Voltage | 3V |
| Number of Channels | 1 |
| Power - Max | 25.5W |
| Current - Supply | 1.35mA |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Auxiliary Sense | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4265CDE#PBF Overview
It is embedded in the Tube package.Packaged in the manner of 12-WFDFN Exposed Pad.Controller (PD) is the type of PoE controller.Channels are growing strong/weak depending on the category: 1.As a precaution, the operating temperature of this Po E controller is kept at 0°C~70°C in order to maintain its reliability.A 37.2V~60V voltage is used to supply power to this electrical Po E controller.The base part number LTC4265 determines the Po E controllers.It is possible to terminate a transmission line with a 12 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.There is a maximum power of 25.5W Watts that can be generated by this electrical ethernet over power controller.12 pins are equipped with it.There is a supply current of 1.35mA in the system.It is included in Power Management Circuits.There is a certain temperature that this electrical ethernet power controller reaches during reflow (Cel) of 260.60V is the maximum input voltage of this electrical power over ethernet PoE controller.As a result of this power over ethernet controller's output voltage being 3V, this voltage is the output voltage.
LTC4265CDE#PBF Features
Tube package
12 pin count
LTC4265CDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4265CDE#PBF Power Over Ethernet (PoE) Controllers applications.
- Security Cameras
- Single-Port PSE Power Injectors
- 4PPOE
- High Temperature Industrial Applications
- Dual Signature PD/Forced UPOE
- WLAN Access Points
- Wireless Access Points
- RFID Readers
- Wireless LAN Access Point/WiMAX? Base Station
- Pass-through System
