LTC4280CUFD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | I2C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~15V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 4mm |
| Base Part Number | LTC4280 |
| Pin Count | 24 |
| Output Voltage | 250mV |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 3mA |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 15V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO |
| Feature Pins | ADIN, /ALERT, /EN, FB, FILTER, GPIO, INTVCC, ON, OV, SOURCE, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4280CUFD#PBF Overview
The 24-WFQFN Exposed Pad package contains it.Channel 1 is currently available.There is a Tube-shaped package for it.The terminations total 24.There is a QUAD terminal position on the device.Hot-swappable device has a total of 24 pins on Hot-swappable device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.This is set up in the same way as Surface Mount.This electrical component is classified as Hot Swap Controller, Monitor.If you want reliable performance, you should set the temperature to 0°C~70°C.There are General Purpose applications available for the device.A feature of I2C describes it.If the power source is 2.9V~15VV, it should work fine.The number LTC4280 belongs to the LTC4280 family.Hot-swappable device is necessary to use 24 pins in order to operate the device.This gadget is self-contained in?Power Management Circuits.Among its programmable features are Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO.This is the current supply of 3mA.The supply voltage (Vsup) should be kept above 2.9V for normal operation.Hot Swap can operate at a maximum supply current of 5mA.High efficiency is feasible with a 250mV output voltage.
LTC4280CUFD#PBF Features
The terminal position of 24
Features of I2C
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
Output voltage of 250mV
LTC4280CUFD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4280CUFD#PBF hot swap controllers applications.
- Networking
- Industrial computers and servers
- Remote access server
- Firewire
- Data communication systems
- Other forms of communications infrastructure
- Network switch
- Industrial
- Storage network
- Redundant-array-of-independent-disk (RAID) storage
