LTC4300A-1CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, Accelerator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | I2C - Hotswap |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4300 |
| Output | 2-Wire Bus |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Adjustable Threshold | NO |
| Current - Supply | 5.1mA |
| Input | 2-Wire Bus |
| Data Rate (Max) | 400kHz |
| Capacitance - Input | 10pF |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4300A-1CMS8#PBF Overview
As a convenience to the user, power buffer has been packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Currently available in Tube packages for power buffer.A universal mout that is easy to adapt.As for types, this is your typical Buffer, Accelerator.There is 2.7V~5.5V voltage used to power this op amp buffer. It works on 2.7V~5.5V voltage.As a result, 2 channels collaborate to maintain output quality.2-Wire Bus input is enabled.A temperature setting of 0°C~70°C should be set on the operating system to prevent malfunctions.There are various applications that can be used with this operational amplifier buffer, including I2C - Hotswap.It is possible to search with "LTC4300" to get more pin-to-pin solutions for your special requirements if you are looking for some.The op amp buffer has 8 terminals that you can find on the side.During reflow, it reaches a temperature of 260.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.This power buffer has 8 pins as its pinout.A 2-Wire Bus value is output by the program.Basically, it's a 5.1mA op amp buffer.Repeters cannot be fed voltages higher than 5.5V.
LTC4300A-1CMS8#PBF Features
2 channels.
Mainly used in I2C - Hotswap.
LTC4300A-1CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4300A-1CMS8#PBF Signal Buffers, Repeaters, Splitters applications.
- Industrial Server
- Multidrop Buses
- Portable IPC/HMI
- Cellular Phone Base Stations
- Protection Switching
- Storage Area Networks
- Industrial PCs
- DSLAMs
- Clock Distribution
- SATA SSDs or HDDs
