LTC4352IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Redundant Power Supplies, Telecom Infrastructure |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.45mm |
| Base Part Number | LTC4352 |
| Pin Count | 12 |
| Output Voltage | 12V |
| Output Type | Voltage |
| Max Output Current | 1.5A |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Turn On Delay Time | 250 ns |
| Current - Supply | 1.4mA |
| Max Output Voltage | 24V |
| FET Type | N-Channel |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 18V |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Number of Drivers | 1 |
| Delay Time - OFF | 200ns |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4352IDD#PBF Overview
The case is 12-WFDFN Exposed Pad-shaped. Tube cases are suitable for packing the part. There are two ways in which this part is mounted. A voltage of 2.9V~18V is applied to it. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. A component connected in Redundant Power Supplies, Telecom Infrastructure would be a good fit for it. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. A N-Channel-type FET can be identified. Among the options available for the part are 12 terminations. Pins are attached to it using 12 pins. LTC4352 is the basis for the part. Powered by 12V, it is capable of delivering its performance to its customers. For 250, the peak reflow temperature of this part is used. It is necessary to run the supply current of the part at 1.4mA in order to make it work. This part is part of the Power Management Circuits family of parts. Among the pins on the part are 12 pins. This part requires a voltage supply (Vsup) of 2.9V or greater. It is possible to use the chip with voltages greater than 18V volts. In terms of output current, the part can be delivered under 1.5A output current. There is a maximum voltage of 12V at its output.
LTC4352IDD#PBF Features
in a 12-WFDFN Exposed Pad case
FET Type: N-Channel
12 terminations
Peak Reflow Temperature (Cel) : 250
LTC4352IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4352IDD#PBF Ideal Diode controller applications.
- Cell phones
- PCs
- Power Tools
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive USB hubs
- Power supply reverse polarity protection
- Head Unit
- Industrial transport
- Modems
- Automotive ADAS systems - camera
