LTC4353CMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Current Sharing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC4353 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 2 |
| Adjustable Threshold | NO |
| Current - Supply | 1.5mA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 2.5mA |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Delay Time - ON | 400ns |
| Height Seated (Max) | 1.1mm |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4353CMS#PBF Overview
The case comes in 16-TFSOP (0.118, 3.00mm Width) shape. Tube cases are suitable for packing the part. There is a Surface Mount-axis mounted on the part. The voltage is set to 2.9V~18V. In order for this component to operate correctly, its minimum operating temperature must not be 0°C~70°C. It is suitable for the component connected in Redundant Power Supplies, Telecom Infrastructure. There is a Current Sharing Controller category assigned to the device. The FET type can be recognized as N-Channel. 16 terminations are available in the part. There are 16 pins on the board and it is designed with them. The part is based on LTC4353. Powered by 12V, it is capable of delivering its performance to its customers. There is a requirement that the supply current be run for the part at 1.5mA in order to complete the operation. A Power Management Circuits family part is involved in the project. The minimum supply voltage (Vsup) for this part should not be less than 2.9V. There is a limit to the maximum supply voltage when Vsup reaches 18V. There should be a current flow in the supply line (Isup) under 2.5mA. With its voltage delivery capability at 12V, it is able to deliver voltage to the load.
LTC4353CMS#PBF Features
in a 16-TFSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
16 terminations
LTC4353CMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4353CMS#PBF Ideal Diode controller applications.
- Power supply reverse polarity protection
- AC Rectifier
- Power Tools
- Factory automation and control - PLC digital output modules
- Automotive battery protection
- Reverse Polarity Protection
- PCs
- Electricity meters
- Camera ECU
- Automotive ADAS systems - camera
