banner_page

LTC4353IMS#PBF

LTC4353IMS#PBF datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Linear Technology/Analog Devices stock available at Noco


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4353IMS#PBF
  • Package: 16-TFSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 160
  • Description: LTC4353IMS#PBF datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Linear Technology/Analog Devices stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-TFSOP (0.118, 3.00mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tube
Published 2012
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Current Sharing Controller
Terminal Finish Matte Tin (Sn)
Applications Redundant Power Supplies, Telecom Infrastructure
HTS Code 8542.39.00.01
Subcategory Power Management Circuits
Technology CMOS
Voltage - Supply 2.9V~18V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 0.5mm
Base Part Number LTC4353
Pin Count 16
JESD-30 Code R-PDSO-G16
Supply Voltage-Max (Vsup) 18V
Power Supplies 12V
Supply Voltage-Min (Vsup) 2.9V
Number of Channels 2
Adjustable Threshold NO
Current - Supply 1.5mA
FET Type N-Channel
Supply Current-Max (Isup) 2.5mA
Ratio - Input:Output 2:2
Internal Switch(s) No
Delay Time - OFF 300ns
Delay Time - ON 400ns
Height Seated (Max) 1.1mm
Length 4.039mm
Width 3mm
RoHS Status ROHS3 Compliant

LTC4353IMS#PBF Overview


The case is 16-TFSOP (0.118, 3.00mm Width)-shaped. Tube cases are suitable for packing the part. The part is mounted in the way of Surface Mount. The voltage that is applied to the circuit is 2.9V~18V. This component's minimum operating temperature must not be -40°C~85°C. Suitable for components connected in Redundant Power Supplies, Telecom Infrastructure. A Current Sharing Controller device is categorized as such. As far as FET types are concerned, N-Channel can be recognized. A 16 termination is available on the part. There are 16 pins on the board and it is designed with them. The part is based on LTC4353. It is powered by 12V to deliver its perfomance. As the part at 1.5mA is running on a supply current, this is needed to ensure that the part can continue to run. A Power Management Circuits family part is involved in the project. This part should have a voltage supply of at least 2.9V (Vsup). The maximal supply voltage (Vsup) reaches 18V. Isup (supply current) should conduct under 2.5mA. At 12V, it can deliver voltage.

LTC4353IMS#PBF Features


in a 16-TFSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
16 terminations

LTC4353IMS#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC4353IMS#PBF Ideal Diode controller applications.

  • Electricity meters
  • Modems
  • Active OR-ing of Redundant (N+1) Power Supplies
  • Building automation
  • Asset tracker
  • Active ORing for redundant power
  • Reverse Polarity Protection
  • Automotive USB hubs
  • Motor drives
  • Automotive infotainment systems - head unit,telematics control unit

Write a review

Note: HTML is not translated!
    Bad           Good