LTC4355CMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 48V -48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4355 |
| Pin Count | 16 |
| Max Output Current | 2mA |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 2mA |
| Adjustable Threshold | NO |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 3mA |
| Turn-Off Delay Time | 300 ns |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Height | 860μm |
| Length | 4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4355CMS#PBF Overview
It comes in 16-TFSOP (0.118, 3.00mm Width) case. A Tube case is a good choice for packing the part. Mounting is done along the Surface Mount-axis. There is a voltage of 48V -48V applied to it. In order for this component to operate properly, its minimum operating temperature must not exceed 0°C~70°C. A component connected in -48V Dist Power Systems, AdvancedTCA? Systems would be a good fit for it. N+1 ORing Controller is the category for the device. In the case of FETs, N-Channel is recognized as the type. 16 terminations are available in the part in order to meet your needs. As you can see, it is designed with 16 pins. LTC4355 is the base of this part. Performance is delivered through 20V. To run 260, we utilize the part's peak reflow temperature. It is a part from the Power Management Circuits family. Among the pins on the part are 16 pins. Voltage supply (Vsup) for this part should not be less than 9V. 80V represents the maximum supply voltage (Vsup). In order for it to operate, a supply current of 2mA is used. Under 3mA, the supply current (Isup) should flow. At 9/80V, it can deliver voltage. Under 2mA output current, the part can be delivered.
LTC4355CMS#PBF Features
in a 16-TFSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
16 terminations
Peak Reflow Temperature (Cel) : 260
LTC4355CMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4355CMS#PBF Ideal Diode controller applications.
- Alternator
- Asset tracker
- Power Tools
- Cell phones
- Industrial motor drives
- Camera ECU
- MP3 Players
- Electronic point of sale
- Modems
- Automotive ADAS systems - camera
