LTC4355IDE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 48V -48V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4355 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 2 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 3mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4355IDE#PBF Overview
It comes in 14-WFDFN Exposed Pad case. The Tube case is ideal for packing the part. I would like to point out that the part is mounted in the way of Surface Mount. An electric current of 48V -48V is applied to it. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. There is a perfect fit between it and the component connected in -48V Dist Power Systems, AdvancedTCA? Systems. As a N+1 ORing Controller-type device, it is categorized. In the case of FETs, N-Channel is recognized as the type. The part is available with 14 terminations. There are 14 pins on it. A part based on LTC4355 is used in this part. In order to deliver its performance, it is powered by 20V. To run 260, we utilize the part's peak reflow temperature. It is necessary to run the supply current at 2mA for the part. The part is from Power Management Circuits family. In this part, there are 14 pins. For this part, Vsup cannot be less than 9V. A maximum supply voltage is achieved as soon as Vsup reaches 80V, which means it is at its maximum level. In order to conduct under 3mA, the supply current (Isup) should be conducted. With its voltage delivery capability at 9/80V, it is able to deliver voltage to the load. In addition, there are 2 outputs available for use.
LTC4355IDE#PBF Features
in a 14-WFDFN Exposed Pad case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
2 outputs
LTC4355IDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4355IDE#PBF Ideal Diode controller applications.
- Factory automation and control - PLC digital output modules
- Asset tracker
- Electricity meters
- Automotive infotainment systems - head unit,telematics control unit
- AC Rectifier
- PCs
- Building automation
- Motor drives
- Alternator
- Automotive ADAS systems - camera
