LTC4355IS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 48V -48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4355 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 2 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 3mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.752mm |
| Length | 9.906mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC4355IS#PBF Overview
The case is made of 16-SOIC (0.154, 3.90mm Width) plastic. As a result, it is suitable for packing the part in the Tube case. There are two ways in which this part is mounted. The voltage is set to 48V -48V. A minimum operating temperature of -40°C~85°C must not be reached by this component. Suitable for components connected in -48V Dist Power Systems, AdvancedTCA? Systems. N+1 ORing Controller represents the device category. In the case of FETs, N-Channel is recognized as the type. A 16 termination is available on the part. Pins are attached to it using 16 pins. LTC4355 underpins the part. In order to deliver its performance, it is powered by 20V. To run 260, we utilize the part's peak reflow temperature. It is necessary to run the supply current at 2mA for the part. The part is from Power Management Circuits family. The minimum supply voltage (Vsup) for this part should not be less than 9V. A maximum supply voltage is achieved as soon as Vsup reaches 80V, which means it is at its maximum level. In order to conduct under 3mA, the supply current (Isup) should be conducted. At 9/80V, it can deliver voltage.
LTC4355IS#PBF Features
in a 16-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
16 terminations
Peak Reflow Temperature (Cel) : 260
LTC4355IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4355IS#PBF Ideal Diode controller applications.
- Cell phones
- PDAs
- Power Tools
- Digital Radios
- ADAS domain controller
- Active ORing for redundant power
- Industrial motor drives
- Asset tracker
- Automotive infotainment systems - head unit,telematics control unit
- Digital Cameras
