LTC4357CMS8#PBF
| Parameters | |
|---|---|
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4357 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 500μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 1mA |
LTC4357CMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case that comes with it. As a result, it is suitable for packing the part in the Tube case. In this case, the part is mounted in the Surface Mount direction. A voltage of 9V~80V is applied to it. It must not be possible for this component to operate at 0°C~70°C°C as its minimum operating temperature. It is fitting for the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. There is a N+1 ORing Controller classification for the device. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. 8 terminations are available in the part in order to meet your needs. 8 pins are used in the design of this product. LTC4357 is the basis for the part. This device is powered by 20V in order to deliver a high level of performance. For 260, the peak reflow temperature of this part is used. As the part at 500μA is running on a supply current, this is needed to ensure that the part can continue to run. In this case, the part belongs to the Power Management Circuits family. It is important that Vsup for this part does not fall below 9V. A maximum supply voltage is achieved as soon as Vsup reaches 80V, which means it is at its maximum level. It should be possible to conduct the supply current (Isup) under 1mA. There is a capability for it to deliver voltage at 9/80V.
LTC4357CMS8#PBF Features
in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4357CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4357CMS8#PBF Ideal Diode controller applications.
- Industrial transport
- Asset tracker
- Active ORing for redundant power
- Camera ECU
- Automotive ADAS systems - camera
- Modems
- Head Unit
- Electronic point of sale
- Motor drives
- Digital Radios
