LTC4357HMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4357 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 500μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 1mA |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4357HMS8#TRPBF Overview
It comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. There is a Surface Mount-axis mounted on the part. An electric current of 9V~80V is applied to it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~125°C. It is fitting for the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. There is a N-Channel type of FET. There are 8 terminations available in the part. It is designed with 8 pins. As you can see, this part is based on LTC4357. 20V provides its performance. Run 260 using this part's peak reflow temperature. To run supply current of the part at 500μA. There is a part of the Power Management Circuits family that is used in this part. There should be no less than 9V voltage supply for this part (Vsup). A maximum supply voltage is achieved as soon as Vsup reaches 80V, which means it is at its maximum level. Isup (supply current) should conduct under 1mA. Voltage can be delivered at 9/80V by it.
LTC4357HMS8#TRPBF Features
in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4357HMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4357HMS8#TRPBF Ideal Diode controller applications.
- Motor drives
- Power Tools
- Automotive battery protection
- Factory automation and control - PLC digital output modules
- PCs
- ADAS domain controller
- Alternator
- USB HUBs
- Automotive ADAS systems - camera
- Cell phones
