LTC4357IDCB#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4357 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 500μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 1mA |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
LTC4357IDCB#TRMPBF Overview
This item comes in a 6-WFDFN Exposed Pad case. Parts should be packed in Cut Tape (CT) cases. Surface Mount is used to mount the part. A voltage of 9V~80V is applied to it. There must not be a minimum operating temperature of -40°C~85°C for this component. It is fitting for the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. The device is categorized as N+1 ORing Controller. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. There are 6 terminations available in the part. There are 6 pins on the board and it is designed with them. Based on LTC4357, this part is manufactured. This device is powered by 20V in order to deliver a high level of performance. For the purpose of running 260, this part's peak reflow temperature is utilized. As the part at 500μA is running on a supply current, this is needed to ensure that the part can continue to run. A part from the Power Management Circuits family is what we are talking about. Voltage supply (Vsup) for this part should not be less than 9V. In order to reach the maximum supply voltage, Vsup should reach 80V as quickly as possible. The supply current (Isup) should conduct under 1mA. At 9/80V, it can deliver voltage.
LTC4357IDCB#TRMPBF Features
in a 6-WFDFN Exposed Pad case
FET Type: N-Channel
6 terminations
Peak Reflow Temperature (Cel) : 260
LTC4357IDCB#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4357IDCB#TRMPBF Ideal Diode controller applications.
- Digital Radios
- Alternator
- Reverse Polarity Protection
- Digital Cameras
- Building automation
- Head Unit
- USB HUBs
- Cell phones
- Camera ECU
- Electricity meters
