LTC4357IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4357 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 500μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 1mA |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4357IMS8#PBF Overview
The case is made of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) plastic. A Tube case is a good choice for packing the part. The part is mounted in the way of Surface Mount. An electric current of 9V~80V is applied to it. The minimum operating temperature of this component must not be -40°C~85°C. It is suitable for the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. It is possible to recognize the FET type as N-Channel. In the part there are 8 terminations that are available. It is designed with 8 pins. As you can see, this part is based on LTC4357. Performance is delivered through 20V. A maximum reflow temperature of this part is used if 260 is to be run. The purpose of this is to make sure that the supply current for the component at 500μA is running as it should be. This part is part of the Power Management Circuits family of parts. It is important that Vsup for this part does not fall below 9V. A maximum supply voltage is achieved as soon as Vsup reaches 80V, which means it is at its maximum level. In order to conduct under 1mA, the supply current (Isup) should be conducted. Voltage can be delivered at 9/80V by it.
LTC4357IMS8#PBF Features
in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4357IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4357IMS8#PBF Ideal Diode controller applications.
- MP3 Players
- Modems
- Active ORing for redundant power
- USB HUBs
- Automotive battery protection
- Digital Cameras
- Head Unit
- Active ORing for redundant power supplies
- Cell phones
- PDAs
