LTC4357MPMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC4357 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 500μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 1.25mA |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4357MPMS8#TRPBF Overview
The case is made of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) plastic. It is suited to pack the part in Tape & Reel (TR) case. I would like to point out that the part is mounted in the way of Surface Mount. We give it a voltage of 9V~80V. This component's minimum operating temperature must not be -55°C~125°C. There is a perfect fit between it and the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. N+1 ORing Controller represents the device category. There is a N-Channel type of FET. A 8 termination is available on the part. There are 8 pins on it. LTC4357 is the base of this part. Performance is delivered by 20V. There is a requirement that the supply current be run for the part at 500μA in order to complete the operation. As far as I know, the part belongs to the Power Management Circuits family. For this part, Vsup cannot be less than 9V. The maximal supply voltage (Vsup) reaches 80V. In order to conduct under 1.25mA, the supply current (Isup) should be conducted. As a result, it is capable of delivering voltage at 9/80V.
LTC4357MPMS8#TRPBF Features
in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
8 terminations
LTC4357MPMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4357MPMS8#TRPBF Ideal Diode controller applications.
- Asset tracker
- Alternator
- ADAS domain controller
- Power Tools
- Electronic point of sale
- AC Rectifier
- Automotive USB hubs
- Active ORing for redundant power supplies
- PCs
- Industrial transport
