LTC4371IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| Additional Feature | SEATED HT-CALCULATED |
| Technology | CMOS |
| Voltage - Supply | -4.5V~-600V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 12.4V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC4371 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-N10 |
| Supply Voltage-Max (Vsup) | 16V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Current - Supply | 300μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 9.5mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4371IDD#PBF Overview
The case that it comes in is called 10-WFDFN Exposed Pad case. In Tube cases, the part will be well protected. Surface Mount is used to mount the part. There is a voltage of -4.5V~-600V applied to it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~85°C. It is suitable for the component connected in -48V Dist Power Systems, AdvancedTCA? Systems. There is a N+1 ORing Controller category assigned to the device. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. 10 terminations are available in the part in order to meet your needs. 10 pins are used in the design. Using LTC4371 as a basis, the part is constructed. Powered by 12.4V, it delivers high performance. As the part at 300μA is running on a supply current, this is needed to ensure that the part can continue to run. This part should have a voltage supply of at least 4.5V (Vsup). Upon reaching 16V, the maximum supply voltage (Vsup) is reached. Under 9.5mA, the supply current (Isup) should flow.
LTC4371IDD#PBF Features
in a 10-WFDFN Exposed Pad case
FET Type: N-Channel
10 terminations
LTC4371IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4371IDD#PBF Ideal Diode controller applications.
- Modems
- Electricity meters
- Factory automation and control - PLC digital output modules
- Active ORing for redundant power supplies
- Head Unit
- Digital Radios
- Alternator
- Industrial motor drives
- ADAS domain controller
- Active OR-ing of Redundant (N+1) Power Supplies
