LTC4412ES6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Handheld, USB Powered Supplies |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.5V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4412 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 2.5/28V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 15μA |
| FET Type | P-Channel |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 13μs |
| Delay Time - ON | 110μs |
| Height Seated (Max) | 1mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | ROHS3 Compliant |
LTC4412ES6#TRMPBF Overview
The case is SOT-23-6 Thin, TSOT-23-6-shaped. Parts should be packed in Cut Tape (CT) cases. Surface Mount is used to mount the part. We give it a voltage of 2.5V~28V. The minimum operating temperature of this component must not be -40°C~85°C. The component connected in Handheld, USB Powered Supplies is suitable for this component. Device Source Selector Switch belongs to the Source Selector Switch category. It is possible to recognize the FET type as P-Channel. In the part there are 6 terminations that are available. Pins are attached to it using 6 pins. Using LTC4412 as a basis, the part is constructed. This device is powered by 12V in order to deliver a high level of performance. In order to run 260, a part's peak reflow temperature is utilized. Using 15μA to run part supply current. A part from the Power Management Circuits family is what we are talking about. This part should have a voltage supply of at least 2.5V (Vsup). A maximum supply voltage is achieved as soon as Vsup reaches 28V, which means it is at its maximum level. With its voltage delivery capability at 2.5/28V, it is able to deliver voltage to the load. The device belongs to PowerPath? series.
LTC4412ES6#TRMPBF Features
in a SOT-23-6 Thin, TSOT-23-6 case
FET Type: P-Channel
6 terminations
Peak Reflow Temperature (Cel) : 260
LTC4412ES6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4412ES6#TRMPBF Ideal Diode controller applications.
- Automotive battery protection
- Electronic point of sale
- Active ORing for redundant power
- Active ORing for redundant power supplies
- AC Rectifier
- Electricity meters
- Asset tracker
- Head Unit
- Automotive infotainment systems - head unit,telematics control unit
- Digital Cameras
